Products

The 16 MHz Crystal – DIP – YXC is a high-precision quartz crystal resonator designed to provide a stable and accurate clock signal for a wide range of digital electronic applications. Operating at a frequency of 16 MHz, this crystal serves as a timing reference for microcontrollers, processors, communication devices,...

The 16 Pin IC Socket / Base – DIP is a reliable electronic component used for mounting 16-pin integrated circuits onto printed circuit boards (PCBs). It allows ICs to be inserted and removed easily without soldering the IC directly to the board, making it highly useful for prototyping, testing, repair,...

Capacitors are essential electronic components widely used in electrical and electronic circuits for storing and releasing electrical energy in the form of an electric field. They consist of two conductive plates separated by an insulating material known as a dielectric, which can vary depending on the application. Excellent Transient Response,...

A glass fuse is a widely used electrical safety component designed to protect circuits from damage caused by overcurrent or short circuits. It consists of a thin metal wire or filament enclosed inside a transparent cylindrical glass tube, with metal end caps on both sides for easy installation in fuse...

Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 1K Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short. These three-terminal devices can be used to vary the resistance between 500 to to 1k ohms by simply...

A cermet preset is a compact, PCB-mountable variable resistor with three terminals. As the adjustment screw is rotated, the voltage across the terminals changes accordingly.Variable resistors are used to adjust voltage levels in a circuit as needed. Typically, the two outer pins are connected to Vcc and ground (0V), while...

Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.Applications: To limit current in a circuit To measure current in a circuit...

The 3386P 1K Ohm Trimmer Potentiometer is a compact, single-turn adjustable resistor designed for precise calibration and tuning of electronic circuits. With a resistance value of 1KΩ, this trimmer allows fine adjustment of voltage levels, current settings, signal gain, timing circuits, and sensor calibration in a wide range of electronic...

The 1K Potentiometer is a three-terminal variable resistor used to adjust or control resistance in a circuit. It is commonly used to regulate devices by varying parameters such as voltage and current in electronic applications. This potentiometer is a passive electronic component consisting of two end terminals connected by a...

The 1K preset potentiometer is a compact, PCB-mountable variable resistor featuring three terminal pins. The output voltage between its terminals changes as the adjustment screw is rotated using a screwdriver. It is designed for precise tuning and calibration in electronic circuits, making it convenient to install and adjust directly on...

A trimpot (trimmer potentiometer) is a compact variable resistor designed for fine adjustment, tuning, and calibration in electronic circuits. It is PCB-mountable and typically adjusted using a screwdriver for precise control. Resistance: 1 kΩTolerance: ±10%Temperature Coefficient: ±100 ppm/°COperating Temperature Range: -55°C to +125°CMounting Type: Through-hole

Potentiometers are widely used to adjust electrical parameters in a circuit. This is a single-turn 1MΩ potentiometer equipped with a rotating knob. It is commonly known as a rotary potentiometer or simply a POT. A knob can also be added for better handling and improved appearance. This potentiometer features a...