Products

The Hot Melt Glue Sticks – 11mm Diameter × 6 Inch are high-quality adhesive sticks designed to provide strong, reliable, and long-lasting bonding for a wide range of applications. These glue sticks are compatible with standard 60W, 80W, and 100W hot melt glue guns that support 11mm diameter glue sticks,...

The HTC DM-830L Digital Pocket Multimeter is a compact, versatile, and easy-to-use handheld measuring instrument designed for testing and troubleshooting electrical and electronic circuits. It can measure DC voltage, AC voltage, DC current, resistance, diode forward voltage, continuity, and transistor hFE, making it suitable for electronics repair, electrical maintenance, laboratory...

The Humidifier / Mist Maker USB Type-C Spray Module 5V DC 108KHz is a compact ultrasonic atomization module designed to generate a fine and continuous water mist using high-frequency ultrasonic vibrations. Operating at 108KHz, it efficiently converts water into microscopic droplets without heating, making it safe, energy-efficient, and suitable for...

The HR202 Humidity Detection Sensor Module is a compact resistive humidity sensing module designed for detecting changes in relative humidity (RH) and providing a threshold-based output for monitoring and control applications. The module uses an HR202 resistive humidity sensor together with an LM393 voltage comparator, allowing it to detect when...

The HX711 Load Cell Amplifier Module is a high-precision 24-bit analog-to-digital converter module designed specifically for interfacing load cells and strain gauge-based weight sensors with microcontrollers and digital systems. Based on the HX711 high-precision ADC chip, this module amplifies the very small differential voltage signal produced by a load cell...

This is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard 16×2, 16×4, and 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode and nearly all commercially available 16×2, 16×4 and 20×4 line character modules...

The KY-022 Infrared IR Receiver Module is a compact infrared receiver designed to detect and decode 38kHz modulated infrared signals transmitted by standard remote controls. Built around a 1838-series IR receiver IC (such as VS1838B, TL1838, or TSOP1838 equivalent), the module converts infrared signals into clean digital pulses that can...

The KY-032 Infrared Obstacle Avoidance Sensor Module is a compact proximity sensor designed to detect nearby objects using reflected infrared light. The module combines an infrared LED transmitter and a 38kHz infrared receiver to detect obstacles without physical contact. When an object enters the sensing range, the reflected infrared signal...

The Inline Fuse Holder for 5 x 20mm Glass Fuse with 22AWG Wire is a compact electrical protection accessory designed to hold standard 5 x 20mm glass cartridge fuses in-line with a power circuit. It provides a convenient way to add replaceable overcurrent protection to DC and low-voltage electrical wiring....

The IR Flame/Fire Sensor Module is a compact infrared detection module designed to identify flames and fire sources by sensing infrared light emitted in the wavelength range typically produced by flames. The module incorporates a highly sensitive IR photodiode along with a comparator circuit that provides both analog and digital...

The IR Obstacle Avoidance Sensor Module with LM393 is a compact infrared proximity sensor designed to detect nearby objects without physical contact. It consists of an infrared (IR) transmitting LED, an IR receiving photodiode, and an onboard LM393 voltage comparator that converts the reflected infrared signal into a stable digital...

The IR Proximity Sensor Switch E18-D80NK is an adjustable infrared photoelectric sensor designed for non-contact object and obstacle detection. It combines an infrared transmitter and receiver in a compact cylindrical housing and detects objects by sensing infrared light reflected from their surfaces. The sensor provides a digital switching output when...