Electronic Components

A cermet preset is a compact, PCB-mountable variable resistor with three terminals. As the preset is adjusted, the voltage between its terminals changes accordingly. Variable resistors like this are used to control voltage levels in a circuit. Typically, the two outer pins are connected to Vcc and ground (0V), while...

Potentiometers are widely used to adjust electrical parameters in a circuit. This is a single-turn 1MΩ potentiometer equipped with a rotating knob. It is commonly known as a rotary potentiometer or simply a POT. A knob can also be added for better handling and improved appearance. This potentiometer features a...

A trimpot (trimmer potentiometer) is a compact variable resistor used for fine adjustment, tuning, and calibration in electronic circuits. It is designed for easy mounting on a PCB and can be adjusted precisely using a screwdriver. Resistance: 100K Ohm Tolerance: 10 % Temperature coefficient: ±100 ppm/ºC Operating temperature range: -55ºC...

Potentiometers are widely used for adjusting electrical parameters in a circuit. This is a single-turn 100KΩ potentiometer equipped with a rotating knob. It is commonly referred to as a rotary potentiometer, or simply a “POT.” A knob can be added not only for ease of use but also to enhance...

1N4007 is a PN junction rectifier diode. These types of diodes allow only the flow of electrical current in one direction only. So, the 4007 diode can be used for the conversion of AC power to DC. 1N 4007 diode is electrically compatible with other rectifier diodes and can be used instead of any of...

The 1N5819 is a Schottky diode with a low forward voltage drop and high switching speed. It is commonly used in high-frequency applications like Inverters, DC-DC converters etc. The 1N5819 axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and...

A diode bridge consists of four diodes arranged in a bridge configuration that ensures a consistent output polarity regardless of the input polarity. It is most commonly used to convert alternating current (AC) into direct current (DC), in which case it is referred to as a bridge rectifier. Features Maximum...

The Green R13-507 16mm Round Cap Momentary Push Button Switch is a compact and reliable control component designed for both industrial and household electrical applications. This 2-pin Push Button Switch works on a momentary mechanism, meaning the circuit is activated only when the button is pressed and automatically turns off...

The 6A 250V SPDT ON-OFF Rocker Switch with Light is the simplest and easiest power control switch for your project. It comes with tabs on the top and bottom which secure it onto an enclosure without the need for any screws. On and Off positions are clearly marked which helps...

This product is a Black R13-507 12mm Push Button Momentary Switch, rated at 3A, 250V AC. It features an SPST (Single Pole Single Throw) configuration and is designed for 12mm panel mounting holes. The switch includes a self-reset mechanism, meaning it automatically returns to its original state after being pressed....

Rocker Switch is perfect for controlling power to electronic circuits, robots, etc. We have carefully selected the best On/Off Rocker Switch with a high load rating and the perfect size to for all general-purpose On/Off applications. This rocker switch has two positions – one on position and another off position....

This Kit has 25 tactile buttons with five different colored caps are great for all sorts of projects. Feature momentary contact, 4 pins, rectangular push button, through-hole mounting, 12 x 12 x 7.1 mm size, etc. Used in the fields of electronic products, household appliances, and more. The tact push...